BDBMH - HI-SPEED CIRCUIT ETCH (CAT NR 839613)
- MSDS: BDBMH
- Manufacturer: PHILIP A HUNT CHEMICAL CORP
- Product Name: HI-SPEED CIRCUIT ETCH (CAT NR 839613)
- National Stock Number: 6810-00-140-8262
Product Identification
Product ID:HI-SPEED CIRCUIT ETCH (CAT NR 839613)
MSDS Date:01/01/1985
FSC:6810
NIIN:00-140-8262
MSDS Number: BDBMH
Responsible Party
Emergency Phone: 201-944-4000
Info Phone: 201-944-4000
Cage: DO532
Contractor
Telephone: 800-OLIN-911
Cage: DO532
Ingredients
FERRIC CHLORIDE (SARA III)
CAS: 7705-08-0
RTECS: LJ9100000
Fraction By Weight: 38.0%
OSHA PEL 1 MG FE/M3
ACGIH TLV: 1 MG FE/M3; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:SKIN: DISCOLORATION & MAY CAUSE SEVERE DAMAGE.
INGESTION: MARKED GASTRO-INTESTINAL IRRITATION.
First Aid
First Aid:SKIN: RINSE AFFECTED AREA THOROUGHLY WITH WATER. REMOVE
CONTAMINATED CLOTHING. EYES: IMMEDIATELY FLUSH WITH LARGE VOLUMES
OF WATER FOR 15 MIN. CALL PHYSICIAN. INGESTION: STOMACH WASH,
FOLLOWED BY SALI NE CATHARSIS & ANODYNE.
Fire Fighting
Flash Point:NONE
Unusual Fire/Explosion Hazard:WHEN STRONGLY HEATED, AS IN A
CATASTROPHIC FIRE, MAY LIBERATE HYDROGEN CHLORIDE
Accidental Release
Spill Release Procedures:CLEAN UP SPILLS IMMEDIATELY. PICK UP AS MUCH
AS POSSIBLE BY SHOVEL OR OTHER MEANS, TRANSFERRING TO A SUITABLE
CONTAINER. ADD WATER TO REMAINDER, THEN FLUSH TO DRAIN, OR USE
NONFLAMMABLE COMMERCIAL AS0 BSORBENT.
Handling
Handling and Storage Precautions:STORE IN COOL (40 - 80F) AREA AWAY FRM
STRONG ALKALIES,REDUCING AGENTS, & OTHER CORROSIVES. PROTECT
CONTAINER FROM DAMAGE. KEEP PLAINLY LABELLED
Exposure Controls
Respiratory Protection:NOT NORMALLY REQUIRED
Ventilation:LOCAL EXHAUST
Protective Gloves:RUBBER/PLASTIC
Eye Protection:GOGGLES OR FACE SHIELD
Other Protective Equipment:PROTECT CLOTHING WITH WATERPROOF APRON.
Supplemental Safety and Health
Chemical Properties
HCC:C1
Boiling Pt:B.P. Text:232F
Vapor Pres:20
Spec Gravity:1.407
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, DEEP AMBER COLORED LIQUID, ODORLESS
Percent Volatiles by Volume:82
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, ALKALIES, OXIDIZING AGENTS & REDUCING AGENTS
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:WHEN STRONGLY HEATED WILL LIBERATE
HYDROGEN CHLORIDE
Disposal
Waste Disposal Methods:RINSE ALL CONTAINERS THOROUGHLY BEFORE
DISCARDING. CONSULT FEDERAL, STATE & LOCAL REGULATIONS REGARDING
POLLUTION & DISPOSAL OF WASTES. SMALL QUANTITIES MAY BE FLUSHED TO
DRAN
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.